With the “Eisbaer” Quick-Connect Extension Kit, expanding an “Eisbaer” or “Eiswolf” GPX-Pro cooler loop with additional components is simple. For example, it’s easy to add another radiator, an additional cooler or any other components.
The kit consists of two 32cm-long hoses in 11/8 format, encased in anti-kink springs. This prevents bending in the hoses, and thereby prevents interruptions to the flow of water. Safety is our top priority.
Two ends have 90° angled pieces, pre-installed on the hoses. The only thing you need to do is screw these into the corresponding G1/4” threads. On the other end are the ends of two quick-release safety locks from the Alphacool HF series, just like the ones found on the “Eisbaer” or “Eiswolf”. That means all you have to do is open the quick-release locks on the “Eisbaer” or “Eiswolf” and screw them together with the corresponding parts in this kit and an additional product for extension, and your loop is complete - after it’s been filled, of course. For that, this kit includes a squeeze bottle with 250mL of osmosis filtered water. With the squeeze bottle, the loop can easily be filled at the designated spots. On the “Eisbaer”, for example, this would be the fill port on the “Eisbaer” cooler.
- tubing length: 32cm
- Material Quick Connector: Nylon
- Colour: Black
- G1/4" Threads
- tubing size: 11/8mm
- Pre-filled: 250ml osmosis water
Scope of delivery:
- Alphacool Eisbaer Quick-Connect Extension Kit
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
Please take care not to mix up the IN and OUT ports. On the “Eisbaer”, the “outlet” is marked in “red” and the “inlet” in “blue”. On the components to be connected, it is the opposite. The coupling with the “blue” marking denotes the “outlet” and the coupling with the “red” marking is the “inlet”. This is important as in many coolers the flow direction is crucial for optimal cooling performance.
Kliknij tutaj, aby wyświetlić to pytanie (pytania).
Kliknij tutaj, aby zobaczyć te oceny.
It says that the coupling in blue is out and red is in on devices to be connected, but the Eiswolf blocks have blue on in and red on out. Where should I connect my tubes to my GPU block?
Das habe ich in der Eisbaer vermisst ist super nur schade dass man das extra kaufen muss.