The new CPU water block from Phobya - a masterpiece of technology!
This water block truly deserves its name: "Phobya Ultra Cooling, version one", or short UC-1
At the core of the Phoby UC-1 lies a new middle layer, based on the patented micro channel recirculation technology which was already successful in the UC-1's predecessor. Further developement of this design for use with a slot structure in the cooling plate allowed the creation of a CPU water block which plays amongst the best on the market. Not only excellent cooling performance, but also outstanding design and quality make the water block unique and innovative. Upon introduction to the market, the Phobya UC-1 immediately climbed to the very top of the CPU water block market [Cited date 14.6.2012 source: Hardwaremax]
A protective foil protects the polished underside of the water block. Please remove this foil before installation! 56x56mm in site, the cooling plate features an extremely fine slot structure which is one of the most advanced on the market. 68 cooling channels fill a surface area of 35 x 31.3mm, each only 0.2mm wide. The fins in between the slots also have a thickness of only approx. 0.2mm. Above the slot structure, an approx. 1mm thick middle plate is inserted. It serves two purposes:
1: In the middle an injection slot is placed, perpendicularly directing the coolant collected from the inlet chamber into the cooling channels
2: At the bottom of the middle plate coolant recirculation channels are implemented. These channels increase flow rates and create mico-turbulence caused by cross-flow, further increasing cooling performance
A wide array of tests was conducted to determine the one design whichlead to the ideal result. Width, length and number of injection slots were variied until the desired result was achieved. An innovative coolant drain system rounds off the design of the water block, featuring two recirculation channels from the outlet collection chamber to the outlet.
For maximum fitting compatibility, the connection threads are spaced 23mm apart (center to center), even allowing the use of tubing with an outer diameter of 16mm! As a result of this well-rounded and innovative design, the Phobya UC-1 achieves sensational cooling performance on single-, dual-, quad- and even hexa-core CPUs!
The black gloss design was further improved and now comes in a more elegant version. Besides the black glossy top plate, both mounting plate and screws are now completely black. Laser engraving on the top plate marks In- and outlet with arrows. Two versions of the water block are available, one compatible with AMD and one with Intel.
In the "Extreme" version (Art. 10422), this water block unleashed the full potential of the ciro channel recirculation technology. A full metal top improves both haptic quality and makes additionally increased performance possible. The UC-1 Extreme version gives a maximum of performance and is perfect for extreme overclocking. If you are looking for the most from your system, this water block is ideal for you. The "LT" versions (Art. 10401) allows affordable entrance into the high-performance sector, with a performance only 2-3K below the "Extreme" version (tested on a Core i2970K quad core CPU). TOP-performance with an affordable pricetag - that is the LT version!
Material water block: Copper, Brass
Material mounting plate: Aluminium
Dimensions Intel version: 94 x 94 x 15mm
Connection thread size: G1/4“
Mounting screw size: M4
Compatibility: Intel: 775, 1366, 1156, 1155, 2011, Xeon
Extent of delivery:
1x Phobya CPU-Cooler UC-1 Extreme Intel 775,1155,156,1366,2011 - Brass Edition
1x Thermal compound Phobya HeGrease Extreme
1x Mounting material
The water block is shipped assembled and pressure-tested. In case of disassembly of the water block the warranty on seal thightness is void.
IMPORTANT: HAND-TIGHTEN FITTINGS ONLY! Only compatible with fittings with a thread length of 5mm or shorter. Damages to the top plate caused by improper use are not covered by the warranty!
|zapinka:||Intel 775, Intel 1366, Intel 1150/1151/1155/1156, Intel 2011(-3), Intel 2066|
|Wymiary (D x S x W):||94 x 94 x 15mm|
Kliknij tutaj, aby wyświetlić to pytanie (pytania).
Kliknij tutaj, aby zobaczyć te oceny.
Tut das was er soll, Verarbeitung und Kühlleistung einwandfrei.
Hochwertig und professional hergestellt
gute Qualität und sehr gute Kühlung, nicht nur durch die Test's
Sitzt bei mir auf einem i7 3820. Kühleistung ist in Ordnung. Hängt bei mir mit einer AMD 290x im Kreislauf. Leider haben im Set alle Federn für die Montage gefehlt, daher nur 4 von 5 Sternen.
ich verwende dieses Produkt im meinen eigenen System und die kühlleistung ist beeindruckend ich kann dieses Produkt echt empfehlen
Super kühlleistung. Sehr guter Wasser durchfluss.